Technology

Our state-of-the-art facility is equipped with the most advanced technology available. We offer Cerec^TM crowns in one visit, intra-oral cameras, diagnostic lasers, Elite Deep Whitening and Lumineer^TM veneers.

• Cerec^TM crowns
• Intra Oral Camera
• Sterilization and Patient Safety
• Lumineer^TM veneers

Cerec^TM crowns

Using a camera wand to upload a 3-dimensionally drawn digital image of your teeth to a computer, Dr. DuCoin can fabricate a new tooth-colored crown out of a block of porcelain while you are in the dental chair. You leave with a perfectly fitting crown all in one visit.

Close

Intra Oral Camera

This wonderful new technology allows you to relax in your chair while simultaneously observing real-time pictures of the inside of your mouth magnified beyond normal size on an adjacent computer monitor! Not only does this make it simple to see and understand what the doctor is telling you, but it also makes it simple for us to keep incredibly accurate records, from one visit to the next.

Close

Sterilization and Patient Safety

Our office uses state of the art sterilization to ensure patient safety. Everything that touches the patient is either disposable so a fresh surface is presented to each patient, or it is sterilized to hospital standards. Sterilization and disinfection are the basic steps in instrument processing and surface asepsis. Sterilization refers to the use of a physical or chemical procedure to destroy all forms of microorganisms, including the highly resistant spores.

We use Rapid Steam Autoclave at 275º F(35psi), for 15-20 minutes

First, the instruments are prepared for the sterilization process. Patient debris and fluids are removed by placing the instruments in 3.2% glutaraldehyde for 40 minutes. Following this pre-disinfection step the instruments are transferred to an ultrasonic cleaner for another 15 minutes. Then the instruments are rinsed, dried, placed in self sealing sterilization pouches and sterilized in the autoclave. Instruments which can not be heat sterilized, are immersed in 2% glutaraldehyde for 10 hours to cold sterilize.

We use Biological, Chemical and Mechanical indicators to monitor our sterilization process.

Using bacterial spores to monitor the sterilization process is referred to as biologic monitoring (or spore-testing), and the bacterial spores used for monitoring the sterilization process are referred to as biologic indicators (BIs). Of the three methods, biologic monitoring is regarded as the most valid for monitoring the sterilization process, for it uses live, highly resistant bacterial spores.

We biologically monitor our sterilizer once a week to ensure complete sterilization using spore strips and keep accurate records for our monitoring. These strips are enclosed in a glassine envelope and processed through the sterilizer. They are then sent to our spore testing center where they are tested for live spores.

Chemical monitoring involves using chemical indicators (CIs) that change color or form when exposed to specific high temperatures or to the sterilizing conditions within a sterilizer. This is referred to as chemical monitoring (or process monitoring). We use sterilization pouches that have special marking that change color when subjected to sterilizing temperatures.

Mechanical monitoring involves observing and recording the physical aspects (e.g., temperature, pressure or time) of the cycle when the sterilizer is being operated. Our Sterilizer is serviced regularly to ensure proper functioning.

Close

Lumineer^TM veneers

Straighten, brighten, and whiten your smile without the investment of time and money required for traditional braces. With Lumineers there is usually no loss of tooth enamel and you have your beautiful, white, straight teeth within 2 or 3 visits.

Close